Добрый день.
есть клисталовская станция. нужно на нее с нуля залить софт r90_h130138c
подключился к станции консолью и ethernet
запустил PCInstaller 2.22
выбрал Call Server type: A4400
на станции в BIOS выбираю 2 и получаю следующее:
BIOS Loader Menu
1 - Load From Hdisk #0
2 - Load From Ethernet (Alize method)
3 - Load From Ethernet (4400 method)
4 - Load From Hdisk #0 and Bootp
5 - MAC Address
6 - PCMS id
7 - System informations
8 - Set interface KENDIN to default(auto-nego)
9 - Interface KENDIN state
10 - Set Interface KENDIN
11 - Ethernet embedded interface state
12 - Full Option Menu
13 - Reset System
CPU7 >2
cascaded counter RESET and Watchdog restarted with 255 min
IP address determination
============================
BOOTP request in progress -> 0:80:9F:81:F5:DD
Bootp resp IP addr src :192.168.1.81
bootp server and TFTP server are the same
TFTP server IP addr ( siaddr) : 192.168.1.81
eth source address=0:15:60:C4:76:D8
No existing archive file specified for this host in BOOTP server database.
Netmask : 255.255.255.0
Our Hostname : OXE_1 (192.168.1.82)
My IP address
192.168.1.82
My SUBNET mask
255.255.255.0
TFTPLOAD STARTED using ip=192.168.1.81 - Bootp Server PHILKA - File Name
TFTP_ERROR ErrorCode = 4, ErrMsg = Missing mode
cmd received :
size of file loaded : 0H at 65F4H
j= 0 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 1 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 2 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 3 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 4 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 5 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 6 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 7 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 8 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 9 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
config action number=0
BIOS Loader Menu
1 - Load From Hdisk #0
2 - Load From Ethernet (Alize method)
3 - Load From Ethernet (4400 method)
4 - Load From Hdisk #0 and Bootp
5 - MAC Address
6 - PCMS id
7 - System informations
8 - Set interface KENDIN to default(auto-nego)
9 - Interface KENDIN state
10 - Set Interface KENDIN
11 - Ethernet embedded interface state
12 - Full Option Menu
13 - Reset System
CPU7 >
это что-то с совтом или еще где то косяк?
есть клисталовская станция. нужно на нее с нуля залить софт r90_h130138c
подключился к станции консолью и ethernet
запустил PCInstaller 2.22
выбрал Call Server type: A4400
на станции в BIOS выбираю 2 и получаю следующее:
BIOS Loader Menu
1 - Load From Hdisk #0
2 - Load From Ethernet (Alize method)
3 - Load From Ethernet (4400 method)
4 - Load From Hdisk #0 and Bootp
5 - MAC Address
6 - PCMS id
7 - System informations
8 - Set interface KENDIN to default(auto-nego)
9 - Interface KENDIN state
10 - Set Interface KENDIN
11 - Ethernet embedded interface state
12 - Full Option Menu
13 - Reset System
CPU7 >2
cascaded counter RESET and Watchdog restarted with 255 min
IP address determination
============================
BOOTP request in progress -> 0:80:9F:81:F5:DD
Bootp resp IP addr src :192.168.1.81
bootp server and TFTP server are the same
TFTP server IP addr ( siaddr) : 192.168.1.81
eth source address=0:15:60:C4:76:D8
No existing archive file specified for this host in BOOTP server database.
Netmask : 255.255.255.0
Our Hostname : OXE_1 (192.168.1.82)
My IP address
192.168.1.82
My SUBNET mask
255.255.255.0
TFTPLOAD STARTED using ip=192.168.1.81 - Bootp Server PHILKA - File Name
TFTP_ERROR ErrorCode = 4, ErrMsg = Missing mode
cmd received :
size of file loaded : 0H at 65F4H
j= 0 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 1 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 2 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 3 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 4 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 5 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 6 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 7 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 8 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 9 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
config action number=0
BIOS Loader Menu
1 - Load From Hdisk #0
2 - Load From Ethernet (Alize method)
3 - Load From Ethernet (4400 method)
4 - Load From Hdisk #0 and Bootp
5 - MAC Address
6 - PCMS id
7 - System informations
8 - Set interface KENDIN to default(auto-nego)
9 - Interface KENDIN state
10 - Set Interface KENDIN
11 - Ethernet embedded interface state
12 - Full Option Menu
13 - Reset System
CPU7 >
это что-то с совтом или еще где то косяк?